Fluorocarbon aluminum veneer characteristics

Fluorocarbon panel manufacturers believe that the thickness of fluorocarbon aluminum veneer is 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, and other thicknesses can be customized according to different customer requirements. The structure of aluminum veneer consists of panel, reinforcement and corner code, which can be directly bent, stamped or riveted on the small side of the panel. The reinforcing bar and the welded rivets behind the panel should be combined firmly to make a solid whole, thus increasing the strength and stiffness of the aluminum veneer products and effectively guaranteeing the flatness and wind and seismic capacity during use. If fluorocarbon aluminum veneer also need sound insulation function, you can install efficient sound insulation materials in the aluminum panel.

Fluorocarbon panel manufacturers believe that the quality of fluorocarbon coating directly affects the quality of aluminum veneer products. Fluorocarbon coating is generally divided into domestic fluorocarbon and imported fluorocarbon. Water-based fluorocarbon coatings and oil-based fluorocarbon coatings can be selected according to the actual requirements of the project. Fluorocarbon coating fluorine content and function, price, service life and so on. The general service life of fluorocarbon aluminum veneer can be guaranteed for 15-20 years.

Fluorocarbon panel manufacturers believe that there are many domestic standards for fluorocarbon paints, mainly restricting their fluorine content, weather resistance, corrosion resistance, mechanical properties, constructability and other properties. Depending on the surface coating, construction, environmental conditions, fluorocarbon paint in 10-30 years, the range of loss of light, loss of color is within the error allowed by the naked eye. That is to say, after 10-30 years, there is no obvious difference between the fluorocarbon on the exterior wall and the one just sprayed in January.

Fluorocarbon panel manufacturers believe that the advantages of fluorocarbon aluminum veneer:

1. Wide applicability of the product.

The applicability of aluminum fluorocarbon finishes is very wide, which can be used in different architectural designs and different occasions, especially those modern architectural styles. Both indoor and outdoor decoration are available, which is a new type of architectural decoration material.

2. Cost-effective

Fluorocarbon aluminum veneer manufacturers believe that the price of fluorocarbon aluminum veneer also has a strong advantage over traditional decorative prices, and long service life, not easy to deform and fade.

3. Various colors

Fluorocarbon veneer can be customized into a variety of colors and shapes, and consumers can choose different products according to their actual needs to create a personalized building.

4. Customizable

Fluorocarbon panel manufacturers believe that this can be said to be the characteristics of the aluminum veneer industry. In order to meet the individual needs of consumers and the different performance requirements of products for different occasions, the aluminum veneer industry usually accepts customized production. In order to provide better service to customers, fluorocarbon veneer manufacturers will continue to carry out technical research and development to develop more practical new products to meet market demand.

Fluorocarbon panel manufacturers believe that the surface treatment process of fluorocarbon aluminum veneer is generally fused pretreatment, then fluorocarbon spray treatment. Fluorocarbon coating is divided into domestic fluorocarbon and imported fluorocarbon. Fluorocarbon coating has good corrosion resistance and weather resistance, acid rain, salt spray and various air pollution. It can keep the color for a long time without fading or losing powder, so the product has a long service life. Fluorocarbon coatings are also available in a variety of colors to meet customers with different colors.