Al-Mg-Mn Metal Plate
The product has the bending and folding strength required for decorative panels, and will not cause bending, deformation, expansion, etc. in the four-season climate state, wind pressure, temperature, humidity and other factors.
Classification:
Pressure Plate
Key words:
Graphic Details
Product Features
1. Light weight. The density of aluminum is 2.73g/cm3, only 1/3 of steel.
2. High strength. Through the composition configuration, processing and heat treatment methods can achieve high strength.
3. Corrosion resistance. It has the ability of self-preventing rust, and the formation of oxide layer can prevent metal oxidation and corrosion, and has good resistance to acid and alkali.
4. Various and beautiful surface treatment. Can be anodized, electrophoresis, chemical treatment, polishing, paint treatment.
5. Good plasticity, easy processing.
6. Good electrical conductivity. Non-magnetization and low EDM sensitivity can prevent electromagnetic interference and reduce flammability in special environments.
7. Easy to install. Aluminum metal can be riveted, welded, glued and other ways to connect.
8. Environmentally friendly. 100% recyclable.
Aluminum magnesium manganese metal plate material has such excellent durability because the aluminum plate and atmospheric contact will produce a layer of aluminum oxide film on the surface of the oxide film protects the inner layer of aluminum to prevent further corrosion of this layer of oxide film has a very good chemical resistance, so it is suitable for industrial buildings with serious air pollution or with the marine climate of the region.
Scope of application
This product is widely used in large hardware factories, chemical factories, ceramic factories, large warehouses, wholesale markets, farmers markets, livestock farms, foundries, electroplating factories, fertilizer factories, paper factories, bleaching and dyeing factories, iron and steel factories, and other industrial plants steel structure plant.
Roof structure
Table parameters
|
|
Pressure steel plate number |
YX15-225-900 |
use | ||
| Effective coverage width (mm) |
900 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.4 |
0.5 |
0.6 |
Roof linings, wall panels | |
| Cross-section inertia distance |
5.30 |
6.65 |
8.03 |
||
|
Cross-sectional moment of resistance |
2.82 |
3.56 |
4.21 |
||
|
|
Pressure steel plate number |
YX8-130-910 |
use | ||
| Effective coverage width (mm) |
910 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.4 |
0.6 |
0.8 |
Roof linings, wall panels | |
| Cross-section inertia distance |
5.81 |
8.85 |
11.12 |
||
|
Cross-sectional moment of resistance |
2.19 |
4.56 |
6.07 |
||
|
|
Pressure steel plate number |
YX25-248-992 |
use | ||
| Effective coverage width (mm) |
992 |
||||
| Spreading width |
1200 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
Roof linings, wall panels | |
| Cross-section inertia distance |
7.10 |
9.80 |
12.40 |
||
|
Cross-sectional moment of resistance |
3.10 |
5.20 |
7.30 |
||
|
|
Pressure steel plate number |
YX28-207-828 |
use | |
| Effective coverage width (mm) |
828 |
|||
| Spreading width |
1000 |
|||
| Plate thickness (mm) |
0.5 |
0.6 |
Roof and wall panels | |
| Cross-section inertia distance |
14.80 |
17.76 |
||
|
Cross-sectional moment of resistance |
12.32 |
14.76 |
||
|
|
Pressure steel plate number |
YX25-205-820 |
use | |
| Effective coverage width (mm) |
820 |
|||
| Spreading width |
1000 |
|||
| Plate thickness (mm) |
0.5 |
0.6 |
Roof and wall panels | |
| Cross-section inertia distance |
4.38 |
5.32 |
||
|
Cross-sectional moment of resistance |
7.18 |
8.35 |
||
|
|
Pressure steel plate number |
YX25-205-1025 |
use | |
| Effective coverage width (mm) |
1025 |
|||
| Spreading width |
1200 |
|||
| Plate thickness (mm) |
0.5 |
0.6 |
Roof and wall panels | |
| Cross-section inertia distance |
9.18 |
10.76 |
||
|
Cross-sectional moment of resistance |
4.68 |
5.62 |
||
|
|
Pressure steel plate number |
YX25-210-840 |
use | |
| Effective coverage width (mm) |
840 |
|||
| Spreading width |
1000 |
|||
| Plate thickness (mm) |
0.5 |
0.6 |
Roof and wall panels | |
| Cross-section inertia distance |
4.44 |
5.38 |
||
|
Cross-sectional moment of resistance |
6.98 |
8.31 |
||
|
|
Pressure steel plate number |
YX35-125-750(V-125) |
use | ||
| Effective coverage width (mm) |
750 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
Roof and wall panels | |
| Cross-section inertia distance |
11.54 |
13.85 |
18.83 |
||
|
Cross-sectional moment of resistance |
6.23 |
7.48 |
10.00 |
||
|
|
Pressure steel plate number |
YX31.5-130-780 |
use | ||
| Effective coverage width (mm) |
990 |
||||
| Spreading width |
1200 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
Roof and wall panels | |
| Cross-section inertia distance |
10.56 |
12.79 |
17.62 |
||
|
Cross-sectional moment of resistance |
5.30 |
6.44 |
8.39 |
||
|
|
Pressure steel plate number |
YX14-63.5-850 |
use | ||
| Effective coverage width (mm) |
850 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
Roof and wall panels | |
| Cross-section inertia distance |
1.84 |
2.25 |
3.04 |
||
|
Cross-sectional moment of resistance |
2.04 |
2.50 |
3.37 |
||
|
|
Pressure steel plate number |
ZT470 |
use | |
| Effective coverage width (mm) |
470 |
|||
| Spreading width |
600 |
|||
| Plate thickness (mm) |
0.5 |
0.6 |
Roof and wall panels | |
| Cross-section inertia distance |
11.52 |
14.31 |
||
|
Cross-sectional moment of resistance |
9.21 |
12.45 |
||
|
|
Pressure steel plate number ZT |
ZT860 |
use | ||
| Effective coverage width (mm) |
860 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.8 |
1.0 |
Roof and wall panels | |
|
Cross-section inertia distance (cm/m) |
2.92 |
3.90 |
4.88 |
||
|
Cross-sectional moment of resistance (cm/m) |
5.80 |
7.59 |
9.31 |
||
|
|
Pressure steel plate number ZT |
ZT850 |
use |
| Effective coverage width (mm) |
850 |
||
| Spreading width |
1000 |
||
|
波高 |
18 |
Roof and wall panels |
|
|
波距 |
63.5 |
|
|
Pressure plate model |
YX25-210-840 |
use |
| Effective coverage width (mm) |
840 |
||
| Spreading width |
1000 |
||
| Plate thickness (mm) |
0.5-0.8 |
Concealed wall panels |
|
|
Pressure plate model |
YX14-63.5-825 |
use | ||
| Effective coverage width (mm) |
825 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
roof panel | |
|
Cross-section inertia distance (cm³/m) |
1.47 |
1.82 |
2.47 |
||
|
Cross-sectional moment of resistance (cm/m) |
2.10 |
2.60 |
3.53 |
||
|
|
Pressure plate model |
YX18-76.2-836 |
use | ||
| Effective coverage width (mm) |
836 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
roof panel | |
|
Cross-section inertia distance (cm/m) |
1.84 |
2.25 |
3.04 |
||
|
Cross-sectional moment of resistance (cm/m) |
2.04 |
2.50 |
3.37 |
||
|
|
Pressure plate model |
YX25-248-995 |
use | ||
| Effective coverage width (mm) |
992 |
||||
| Spreading width |
1200 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
wall panel | |
|
Cross-section inertia distance (cm/m) |
7.1 |
9.8 |
12.4 |
||
|
Cross-sectional moment of resistance(cm/m) |
3.1 |
5.2 |
7.3 |
||
|
|
Pressure plate model |
YX15-225-900 |
use | ||
| Effective coverage width (mm) |
900 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.4 |
0.5 |
0.6 |
Roof linings, wall panels | |
|
Cross-section inertia distance (cm⁴/m) |
5.3 |
6.65 |
8.03 |
||
|
Cross-sectional moment of resistance (cm/m) |
2.52 |
3.56 |
4.21 |
||
|
|
Pressure plate model |
YX76-344-688 |
use | ||
| Effective coverage width (mm) |
688 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.8 |
1.0 |
1.2 |
Floor Steel Bearing Plate | |
|
Cross-section inertia distance (cm'/m) |
91.62 |
119.38 |
142.01 |
||
|
Cross-sectional moment of resistance (cm/m) |
23.46 |
30.58 |
36.98 |
||
|
|
Pressure steel plate number |
YX51-240-720 |
use | ||
| Effective coverage width (mm) |
720 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.8 |
1.0 |
1.2 |
Floor Steel Bearing Plate | |
|
Cross-section inertia distance (cm/m) |
52.8 |
64.55 |
76.38 |
||
|
Cross-sectional moment of resistance (cm/m) |
16.45 |
20.69 |
26.39 |
||
|
|
Pressure steel plate number |
RSS820 |
use | |
| Effective coverage width (mm) |
820 |
|||
| Spreading width |
1000 |
|||
| Plate thickness (mm) |
0.5 |
0.6 |
Concealed wall panels | |
| Cross-section inertia distance |
22.62 |
27.14 |
||
|
Cross-sectional moment of resistance |
15.06 |
18.00 |
||
|
|
Pressure steel plate number |
YX76-380-760 |
use | ||
| Effective coverage width (mm) |
760 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.6 |
0.8 |
1.0 |
Concealed wall panels | |
| Cross-section inertia distance |
37.27 |
49.69 |
62.10 |
||
|
Cross-sectional moment of resistance |
12.29 |
16.39 |
20.48 |
||
|
|
Pressure steel plate number |
YX54-410-820 |
use | ||
| Effective coverage width (mm) |
820 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.6 |
0.8 |
1.0 |
Concealed wall panels | |
| Cross-section inertia distance |
37.53 |
49.77 |
62.14 |
||
|
Cross-sectional moment of resistance |
12.41 |
16.52 |
20.59 |
||
Horizontal mounted 780 large corrugated wall system
|
|
Pressure steel plate number |
YX31.5-130-780 |
use | ||
| Effective coverage width (mm) |
780 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
wall panel | |
| Cross-section inertia distance |
8.68 |
10.53 |
15.69 |
||
|
Cross-sectional moment of resistance |
5.12 |
6.59 |
8.65 |
||
Upright Locking Seam 470 Roofing System
|
|
Pressure steel plate number |
RSS478 |
use | |
| Effective coverage width (mm) |
478 |
|||
| Spreading width |
600 |
|||
| Plate thickness (mm) |
0.5 |
0.6 |
Concealed wall panels | |
| Cross-section inertia distance |
35.23 |
42.21 |
||
|
Cross-sectional moment of resistance |
21.65 |
25.86 |
||
Upright Locking Seam 478 Roofing System
|
|
Pressure steel plate number |
YX31.5-130-780 |
use | ||
| Effective coverage width (mm) |
780 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
wall panel | |
| Cross-section inertia distance |
8.68 |
10.53 |
15.69 |
||
|
Cross-sectional moment of resistance |
5.12 |
6.59 |
8.65 |
||
|
|
Pressure steel plate number |
YX54-410-820 |
use | ||
| Effective coverage width (mm) |
820 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.6 |
0.8 |
1.0 |
Concealed wall panels | |
|
Cross-section inertia distance (cm/m) |
37.53 |
49.77 |
62.14 |
||
|
Cross-sectional moment of resistance (cm/m) |
12.41 |
16.52 |
20.59 |
||
|
|
Pressure steel plate number |
YX25-205-820 |
use | ||
| Effective coverage width (mm) |
820 |
||||
| Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
Roof and wall panels | |
| Cross-section inertia distance |
9.18 |
10.76 |
14.59 |
||
|
Cross-sectional moment of resistance |
4.68 |
5.62 |
7.47 |
||
|
|
Pressure steel plate number |
YX25-205-1025 |
use | ||
| Effective coverage width (mm) |
1025 |
||||
| Spreading width |
1200 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
Roof and wall panels | |
|
Cross-section inertia distance (cm³/m) |
9.18 |
10.76 |
14.59 |
||
|
Cross-sectional moment of resistance (cm/m) |
4.68 |
5.62 |
7.47 |
||
|
|
Pressure steel plate number |
YX35-125-750(V-125) |
use | ||
| Effective coverage width (mm) |
750 |
||||
|
Spreading width |
1000 |
||||
| Plate thickness (mm) |
0.5 |
0.6 |
0.8 |
Roof and wall panels | |
|
Cross-section inertia distance (cm²/m) |
1,154 |
13.85 |
18.83 |
||
|
Cross-sectional moment of resistance (cm/m) |
6.23 |
7.48 |
10 |
||
